What do you need to know about the craft of woodworking? There isn't much to is other than cutting some wood and then affixing pieces together, right? There is much more than that in the hobby. It can be fun if you know all about it.

When you are working with wood, safety must be the number one priority. Be certain you always have the right safety equipment, and use your tools properly. Don't take guards off the power tools. If you end up hurt, you won't be able to work at all.

If you are going to be staining your project, test on a scrap of wood or an inconspicuous area. This will allow you not to have any surprises later if the stain's color looks different when it is applied. You never know how wood will behave, so do the test first.

Use stair gauges as a crosscut guide. Match them to the rise and run of your stair jack, then attach them to the carpenter's square. After that the notches can be marked. If you put them on the same tongue of your carpenter's square, the combination that you can make will be a great circular saw crosscut guide.

Never shake a finish or a stain. Only stir them. The ingredients in these can settle over time. However, shaking can cause bubbling and prevent a thorough mixing of the product. Stir it well and you shouldn't have an issue.

Have a budget before beginning any woodworking project. A lot of times, your eyes can be way bigger than your budget when you do woodworking projects. It is very disappointing to run out of funds before your project is complete. Plan things out in advance, and you won't have unpleasant surprises.

Ask the rental company for a speedy tutorial when renting a tool you aren't completely familiar with. Oftentimes, they have someone available to train you with the tool. You should also ask if there are any handouts available that will familiarize you with the tool.

Before gluing your project together, you should try dry fitting first to make sure the pieces fit together properly. If you don't and then try to do adjustments, chances are you'll create damage to your project. Dry fitting helps you figure out where each piece is placed.

Use the right sized nail for a job. Using improper nails is a common mistake make by beginners. Nails that are too large can cause the wood to split. Small nails won't give a good bond. It is important that you find properly sized nails in order to have a successful project.

Put some more spring in your grip. Trying to make use of a spring clamp when you only have one free hand is not always easy. These clamps can be very difficult to open with one hand. You can make it easier on yourself. Prior to starting a glue-up, be sure to arrange all necessary clamps on a piece of scrap wood first. This allows you to use one hand because it will put them close to their maximum capacity.

Ear protection is important. Machinery causes a lot of noise, which can damage your ears. You could lose your hearing because of it. It is easy to buy disposable plugs for the ears, or you may decide to buy pricier headphones. No matter what you choose, be sure that you use them whenever you operate machinery.

Do you need to tighten a screw, but can't reach it? You should look to your toolbox for assistance. Get a screwdriver with a long handle and a socket that is 12 point. Just put your screwdriver into the socket and use your ratchet to get the job done.

Always be on the lookout for wood that you can get at no cost. A lot of places have unwanted pallets. Look online for some examples of up-cycled pieces to give you some ideas before you start.

If you're getting into woodworking, find others who are interested in your same hobby. Woodworking shops are generally personal spaces without Internet. There will still be times you get stuck on a particular problem within a larger project. Get help and support from other woodworkers during these times. You will never find a problem that someone hasn't had before you and asked about.

For small cuts, use a drafting square. If you need to cut wood accurately at the 2 to 3 foot range, it can be difficult to measure accurately. Using drywall squares is inaccurate and carpenter squares need to be fastened to edges that make them cumbersome. Try stopping into your friendly neighborhood art supply store to pick up a drafting square. These are simpler to use and provide the necessary accuracy.

Always double check your measurements. When using expensive materials, be on the safe side and triple check. A lot of the time measuring will be where a lot of people make mistakes. Do not cut too short, as this can ruin the integrity of your project.

The television offers many woodworking programs. You can pick up useful tips and tricks from them. They can help inspire you to new heights in creativity. If you are not sure of how to find these shows, look through your TV guide.

Know all of the steps that the project requires before beginning it. Don't glance at the instructions and expect to get the job done right. Read over the instructions a handful of times to ensure you know what you're doing.

Many woodworking shops have different saws. A circular saw, which is used for short cuts, a table saw for straight, long cuts and a miter saw for cutting angles. Jigsaws or scroll saws are used for more intricate cuts. A saber saw might be there too. It's used for trimming when a circular saw is impractical.

You likely now know that there is a great deal more to woodworking than just sticking wood together. Do you want to start enjoying it today? There are many practical and monetary benefits that this trade can offer.